Right. One thing that is a little out is BW 4000MB and ring speed 16 Mbps.
Fred Dennis Laganiere wrote: > > I just wanted to double-check myself. The line #9 from the following "show > interface token-ring 0" output says... > > 1.) TokenRing 0 is up, line protocol is up > 2.) Hardware is Dual Token Ring, address is 0000.3080.5fca (bia > 0000.3080.5fca) > 3.) Internet address is 1.0.0.7, subnet mask is 255.0.0.0 > 4.) MTU 8136 bytes, BW 4000 Kbit, DLY 630 usec, rely 255/255, load 1/255 > 5.) Encapsulation SNAP, loopback not set, keepalive set (10 sec) > 6.) ARP type: SNAP, ARP Timeout 4:00:00 > 7.) Ring speed: 16 Mbps > 8.) Single ring node, Source Route Transparent Bridge capable > 9.) Source bridging enable, srn 1 bn 2 trn 1000 (ring group) > 10.) Proxy explorers disable, spanning explorer enabled, NetBIOS cache > disable > 11.) Group Address: 0x00000000, Functional Address: 0x0000011A > > local ring number - 1 > bridge number - 2 > ring group - 1000 > > Right? > > --- Dennis Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23698&t=23640 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
