timers spf spf-delay spf-holdtime spf-delay: Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. Default 5 seconds.
spf-holdtime : Minimum time (in seconds) between two consecutive SPF calculations. The timers are used to reduce SPF calculations therefore increase stability. CCIE Study Professional Checklist http://www.geocities.com/berdde/ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of malay patel Sent: Tuesday, October 23, 2001 10:24 AM To: [EMAIL PROTECTED] Subject: Re: SPF timer in OSPF [7:23834] FYI, I belive, SPF algorithms calculates new routing table when ever there are changes. Malay Patel --- Jerry Seven wrote: > Hi, > > In OSPF, is SPF algorithms running periodically or > just invoked when route > change happens? If the first one is true, what's > the command to change it? > I saw "timer spf" in CCO, but seems for other > purpose. > > Thanks, > Jerry > > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at > http://mail.yahoo.com [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Make a great connection at Yahoo! Personals. http://personals.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23883&t=23834 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]