In a point to multipoint OSPF network configuration the links are treated as point to point and you do not need neighbor statements.
-- -=Repy to group only... no personal=- ""Curtis Call"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Following the spec it should be unicast. Keep in mind that > non-broadcast networks (point-to-multipoint) don't support > multicasting, that's why you have to manually configure your > neighbors. As far as whether broadcast networks that are set > to point-to-multipoint via the Cisco command use unicast or > multicast I'm not sure since this is not part of the standard. > I would guess that they still use unicast since it is trying > to pretend like it's a point-to-multipoint network. > > "Jim Bond" wrote: > > Hello, > > > > On Jeff Doyle's TCP/IP volume I, P417 it says > > point-to-multipoint is multicast; P433 it says it's > > unicast. Which one is correct? > > > > Thanks in advance. > > > > Jim > > > > > ---------- > [EMAIL PROTECTED] > OSPF/BGP Practice Exams > www.boson.com\tests\Advanced.htm Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=23960&t=23655 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
