Yes. Pins 1,2 4,5 on one RJ45 end. Then on the other take pin 4 to 1 and 5 to 2. Remember one 1600 will need to be set for internal timing and the other for external.
-----Original Message----- From: Gibb, Jake [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 25, 2001 9:33 AM To: [EMAIL PROTECTED] Subject: WIC-T1 crossover? [7:24095] Is it possible to take a WIC-T1 card used in a Cisco 1600 and somehow make a crossover cable to connect to another 1600 with a WIC-T1 simulating a serial link (PPP, Frame-Relay, etc.) -Jake Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24103&t=24095 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
