Yes, don't do it for real though IMHO. This was the ONLY way to cnfig frame when Cisco first supoorted frme-relay.
Dave Hollis wrote: > > Is the following network design possible: > - hub and spoke design, spokes are not connected via PVC > - hub does not use sub-interface > - common subnet for all routers -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24249&t=24189 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]