first, ensure both router's ethernet port are connected with the same lan open debug ip hsrp on each router to debug the status of the ACTIVE , STANDBY.
""Kevin Pan"" One day, I discovered that one of the router continuously display an error > message from the console showing that there is a bad authentication between > HSRP members. > > *Oct 27 07:15:19: %STANDBY-3-BADAUTH: Bad authentication from x.x.x.x, > remote state Init > > Right now, there are only two routers forming the HSRP group. The > configuration was extracted as below: > > Router1 > interface Ethernet1 > ip address x.x.x.245 255.255.255.0 > standby 2 priority 200 preempt > standby 2 ip x.x.x.254 > > Router2 > interface Ethernet0/1 > ip address x.x.x.247 255.255.255.0 > standby 2 priority 150 preempt > standby 2 ip x.x.x.254 > > The message was only discovered on Router1. When I tried to increase the > priority of Router2 and make it becomes active. Then no error messages > appeared. > > Anyone has an idea? > > Please advise. > > Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24373&t=24358 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
