you have to use a regular straight through patch cable. db 9 connector is fine. but the console cable will not work. go to this page and follow the steps http://www.cisco.com/warp/public/474/pswdrec_6000.html#proc
Kevin -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Alexandre Carvalho Sent: Saturday, October 27, 2001 10:47 PM To: [EMAIL PROTECTED] Subject: How to config the catalyst 1200 and crack its pwd! [7:24394] Hello team.. I am kind of confused and now worried about how to config the catalyst 1200. I am using the console cable and a db9 connector plugging directly into the admin port and when I power on, guess what?? it just stays there and doesn't display anything. I went to cisco site and downloaded the manual. I had talked already to someone on this group and he told me that I have to use a DB-25 instead of DB-9. My question is: Would that make any difference?? And if it does.. A DB-9 to DB-25 converter would solve my problem?? Another question: How do I crack the pwd?? I am kind desperate now..because I've got some of them just sitting in front of me and I can't do anything!!! Please advise, Alex Carvalho Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24451&t=24451 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]