OK, I'm asking a few more questions than I'm answering lately. Question about IPX RIP (not IP RIP - although they may work the same way in this instance).
Say I have the following setup... RT1---RT2---RT3---RT4 The RT2 to RT3 link is ethernet, the others are serial, although I'm not sure that that makes a difference. The IPX RIP update time is set to five minutes on the RT1 to RT2 link, and defaults (to 60 seconds) on the other two links - again, I'm not sure that this makes a difference. There are no relevant filters in this scenario. If the IPX routes are cleared on RT1 (clear ipx route *), how far will triggered RIP updates/changes be propagated? Will any extra traffic (above normal RIP updates) be created from RT3 to RT4? Thanks, JMcL Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24621&t=24621 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]