Hi all. I've got a situation where I want to apply a custom queue list to a dlci under my frame-relay connection. I can apply the custom-queue-list to my serial interface, but not the sub serial interfaces.
For example here is a piece of my config: interface Serial0/0 description no ip address encapsulation frame-relay no ip mroute-cache logging event subif-link-status logging event dlci-status-change custom-queue-list 1 ! interface Serial0/0.1 point-to-point description to REMOTE SITE 1 ip address 192.168.1.30 255.255.255.252 no arp frame-relay frame-relay interface-dlci 16 ! interface Serial0/0.2 point-to-point description to REMOTE SITE 2 bandwidth 512 ip address 192.168.1.25 255.255.255.252 no arp frame-relay frame-relay interface-dlci 17 What I would like to do is apply that custom-queue-list to only dlci 17 (REMOTE SITE 2). I don't want to use it whatsoever for dlci 16. Is this possible? Any help/responses will be very helpful. Thanks, Brad M. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24625&t=24625 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
