Every client VLAN will need its' own IPX network number and appropriate
frame encapsulation type.
int vlan 10
ip address 10.10.10.2 255.255.255.0
standby 10 ip 10.10.10.1
standby 10 prior 110 pre
ipx network 10 encapsulation sap
int vlan 11
ip address 10.10.11.2 255.255.255.0
standby 11 ip 10.10.11.1
standby 11 prior 110 pre
ipx network 11 encapsulation sap
In addition, you must enable IPX routing... (global mode, ipx routing
xxxx.xxxx.xxxx.) just use IPX RIP for now.
ipx router rip
network 10
network 11
Do yourself a favor and have the clients (and servers) hard-coded to the
frame type and STP portfast enabled.
-Brant
----- Original Message -----
From: "Cisco Breaker"
To:
Sent: Tuesday, October 30, 2001 7:09 AM
Subject: VLAN and IPX [7:24641]
> Hi all,
>
> I have a customer that uses both Novell and NT. We upgraded their LAN with
> 6500 and 3500 switches. Now we will implement VLANs. I know how to
configure
> VLAN for IP but never done it with IPX. I red the docs on cisco but I have
a
> question on my mind. As I know the customer only give a network IPX number
> to the server and clients get their Network numbers from the server. If I
> put the server on a different VLAN will the router give a network number
to
> clients or will I have to show the way to clients to reach the server.
>
> My guess is this
>
> interface vlan 2
> ip address ......................
> ipx network 101 (this is the network where the server is)
> interface vlan 3
> ip address ........................
> ipx network 102 (this is the network where clients will be)
>
> If I configure my router like this will clients able to find the server
or
> what should I do?
>
> Best regards,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=24683&t=24641
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
