Hello all, I have set up an ip address on my ethernet port on a 2501. Will this also work if it is connected to a hub rather than directly to a switch. ie ---switch--->hub--->AUI transceiver--e0 Or maybe I am using the wrong cable between the hub and transceiver? I am using a straight through cable. The hub is a netgear 10bt and it doesnt blink on the right side when attached to the transceiver.
thanks stuart Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24779&t=24779 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]