hi all,
any can detect any errors in this show interface
results :
I am thinking that the only problem is the collisions'
part , any inputs will be greatly appreciated
Ethernet0/0 is up, line protocol is up
Hardware is AmdP2, address is 0030.949d.2440 (bia
0030.949d.2440)
Internet address is xxxx
MTU 1500 bytes, BW 1024 Kbit, DLY 1000 usec,
reliability 255/255, txload 234/255, rxload
103/255
Encapsulation ARPA, loopback not set, keepalive set
(10 sec)
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang
never
Last clearing of "show interface" counters 00:37:02
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 2/75, 0
drops
5 minute input rate 415000 bits/sec, 550 packets/sec
5 minute output rate 940000 bits/sec, 564
packets/sec
1177252 packets input, 109281256 bytes, 0 no
buffer
Received 8226 broadcasts, 0 runts, 0 giants, 0
throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0
ignored, 0 abort
0 input packets with dribble condition detected
1171610 packets output, 254515655 bytes, 0
underruns
0 output errors, 52310 collisions, 0 interface
resets
0 babbles, 0 late collision, 26250 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers
swapped out
regards,
suaveguru
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=24915&t=24915
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
