What does the path on the EBGP peer look like? You need confed-id on all
IBGP peers?
Jason Sinclair
Network Support Manager
POWERTEL Limited
Level 11, 55 Clarence Street, SYDNEY
Phone: 61-2-8264-3820
Fax: 61-2-9279-2604
Mobile: 0416 105 858
[EMAIL PROTECTED]
-----Original Message-----
From: McCallum, Robert
[mailto:[EMAIL PROTECTED]]
Sent: Friday, 2 November 2001 02:54
To: 'Sijbren Beukenkamp'; McCallum, Robert
Cc: 'Ccielab' (E-mail); Cisco@Groupstudy. Com (E-mail);
[EMAIL PROTECTED]
Subject: RE: BGP Confederations
I have just configured the scenario below on my lab and it
appears that the internal BGP peers do not need to know the Confed id or
peers. If I look at the bgp table all the correct routing info is getting
passed i.e. an internal bgp router still sees in its bgp routing table that
networks have
came from certain confeds i.e. as path = (8) (7) 254 23. I
believe now that you only have to configure confed and peers only on the
borders.
correct me if I am wrong here.
-----Original Message-----
From: Sijbren Beukenkamp [mailto:[EMAIL PROTECTED]]
Sent: 01 November 2001 15:39
To: McCallum, Robert
Cc: 'Ccielab' (E-mail); Cisco@Groupstudy. Com (E-mail);
[EMAIL PROTECTED]
Subject: Re: BGP Confederations
Yes,
you have to configure all routers within your confederation
with you
confederation id.
Met vriendelijke groet/ Kind regards,
Sijbren
++++++++++++++++++++++++++++++++++++++++++++++++++++
Ing. Sijbren Beukenkamp IBM Global Services
Internetworking Specialist Integrated Technology Services
Networking &
Connectivity
Services
http://www.ibm.com/services/nc/
GSM +31 (0)6 53761703 The Netherlands
Office: +31 (0)30 2850 666
"McCallum, Robert"
Sent by: [EMAIL PROTECTED]
01-11-2001 16:25
Please respond to "McCallum, Robert"
To: "'Ccielab' (E-mail)"
, "Cisco@Groupstudy. Com
(E-mail)"
cc:
Subject: BGP Confederations
Hi,
If you have 4 routers within an confederation r1,r2,r3&r4.
R1 has and
EBGP connection to another As so therefore has the bgp
confederation id
and confed peer statements on it. My question is do all of
the IBGP
router (r2,r3&r4) require the confed statements on them even
if they are
only IBGP
routers??
14 days to go!! Starting to have some fun !!
Robert McCallum
__________________________________________________________________
Trouble posting? Read:
http://www.groupstudy.com/list/posting.html
To unsubscribe from the CCIELAB list, send a message to
[EMAIL PROTECTED] with the body containing:
unsubscribe ccielab
**********************************************************************
PowerTel Limited, winners of
Broadband Wholesale Carrier of the year, CommsWorld Telecomms Awards 2001
Best Emerging Telco, Australian Telecom Awards 2001
**********************************************************************
This email (including all attachments) is intended solely for the named
addressee. It is confidential and may contain commercially sensitive
information. If you receive it in error, please let us know by reply email,
delete it from your system and destroy any copies.
This email is also subject to copyright. No part of it should be reproduced,
adapted or transmitted without the prior written consent of the copyright
owner.
Emails may be interfered with, may contain computer viruses or other defects
and may not be successfully replicated on other systems. We give no
warranties in relation to these matters. If you have any doubts about
the authenticity of an email purportedly sent by us, please contact us
immediately.
**********************************************************************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=25004&t=25004
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
