Have an idea to solve a problem at work and would like to see if any of you
see a problem with this rather simplistic solution. No routing can occur due
to the nature of the traffic. T1s between the 1720s which are configured "no
ip routing" and to bridge the traffic from E0 to S0, 1720 a and b to have a
higher priority assigned for STP as that is the normally desired path to the
remote location. Was going to use HSRP but don't think that works when no ip
routing is configured and that protocol leaves something to be desired when
dealing with wans. Ideas?
_____1720a----------1720b_____
__ 1912____| |__1912__
|____1720c----------1720d_____|
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=25044&t=25044
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
