A typical static route will have an AD of 1, or possibly even 0 if it's pointing directly to an interface. A floating static would have an AD higher than whatever routing protocol you're running. If you see statics in the table with high ADs then those are likely "floating".
HTH, John >>> "Todd Carswell" 11/2/01 7:48:14 AM >>> I know that Static Routes have a higher priority than routes learned dynamically. I've also learned that the exception to this rule is that floating static routes can take a back seat to dynamic routes. (Please feel free to beat me about the head if I'm wrong on this one. It will only help me in the long run!) Here's my question: If I'm looking at the routing table in a router that I did not configure, how can I know that a static route is a floating static route and not just a "run-o-the-mill" static route? Thx Todd Carswell Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25062&t=25059 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
