[ The following text is in the "iso-8859-1" character set. ] [ Your display is set for the "US-ASCII" character set. ] [ Some characters may be displayed incorrectly. ]
All here is the boot up message and a sh ver. Look at the bold and underlined portion of this message why is that showing up this is a 2503. Before I buy 8 meg more flash for it to bump it up to 16 meg flash I want to make sure nothing is wrong. I have a config on it now and it seems to work fine but can't figure out why this is happening. System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1) Copyright (c) 1986-1998 by cisco Systems 2500 processor with 16384 Kbytes of main memory %SYS-4-CONFIG_NEWER: Configurations from version 11.2 may not be correctly under stood. F3: 7856500+96596+313640 at 0x3000060 Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-J-L), Version 11.2(12), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1998 by cisco Systems, Inc. Compiled Mon 23-Feb-98 14:53 by tlane Image text-base: 0x0303F098, data-base: 0x00001000 cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of memory. Processor board ID 03299226, with hardware revision 00000000 Bridging software. SuperLAT software copyright 1990 by Meridian Technology Corp). X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. TN3270 Emulation software. Basic Rate ISDN software, Version 1.0. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 1 ISDN Basic Rate interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read ONLY) Press RETURN to get started! #sh ver Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-J-L), Version 11.2(12), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1998 by cisco Systems, Inc. Compiled Mon 23-Feb-98 14:53 by tlane Image text-base: 0x0303F098, data-base: 0x00001000 ROM: System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1) BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1) 2503BottomRack uptime is 2 minutes System restarted by power-on System image file is "flash:c2500-j-l.112-12.bin", booted via flash cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of memory. Processor board ID 03299226, with hardware revision 00000000 Bridging software. SuperLAT software copyright 1990 by Meridian Technology Corp). X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. TN3270 Emulation software. Basic Rate ISDN software, Version 1.0. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 1 ISDN Basic Rate interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read ONLY) Configuration register is 0x2102 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25780&t=25780 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]