I am setting up etherchannel between a 5509 and two Intel Pro/100 server adapters and if I set the etherchannel mode to "desirable" on the 5509, it shows no ports are channeling. Using "auto" doesn't show channeling either. If I set it to "on", then of course it shows my ports are channeling but I read that if you use "on", both sides should be forced. Problem is I can't find a way to do it on Intel NICs. I used Intel ProSet II to team the adapters using fast etherchannel.
For those that may have set this up before, is there a way to force the NICs to a certain mode and should I be able to see the NICs when doing a "sho port channel" if they 5509 is set to desirable or auto? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25746&t=25746 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]