Thanks Dave. So the only way I can get this to work is to use subinterfaces?
Shahram On Mon, 12 Nov 2001, MADMAN wrote: > > First thing I would do is configure the frame relay correctly. You > are using point-to-point commands, (frame-relay interface-dlci x) on a > multipoint interface, which is the default if you don't subinterface and > configure the sub as p-t-p. > > Dave > > Shahram Esfahani wrote: > > > > I am encountering a strange problem that I'm hoping someone can help with. > > I'm running a FR hub and spoke environment with RIP. My layer 2 is fine, > > and I can ping all interfaces from the hub and spokes. Here's the > > topology: > > > > Rtr A (hub) ------- Rtr B > > ------- Rtr C > > ------- Rtr D > > > > On the hub, I'm able to receive all of the spoke's RIP updates but I get a > > Traceback error when the hub tries to broadcast it's routing table. Below > > is some relevant information: > > > > termsrv#sh ip route > > Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP > > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area > > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 > > E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP > > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter > > area > > * - candidate default, U - per-user static route, o - ODR > > P - periodic downloaded static route > > > > Gateway of last resort is not set > > > > R 16.0.0.0/8 [120/1] via 192.168.100.3, 00:00:06, Serial0 > > 3.0.0.0/24 is subnetted, 1 subnets > > C 3.3.3.0 is directly connected, Loopback1 > > R 64.0.0.0/8 [120/1] via 192.168.100.4, 00:00:21, Serial0 > > 10.0.0.0/24 is subnetted, 1 subnets > > C 10.10.0.0 is directly connected, Loopback0 > > C 193.1.1.0/24 is directly connected, Ethernet0 > > R 12.0.0.0/8 [120/1] via 192.168.100.2, 00:00:25, Serial0 > > R 194.0.0.0/24 [120/1] via 192.168.100.2, 00:00:25, Serial0 > > C 192.168.100.0/24 is directly connected, Serial0 > > R 195.0.0.0/24 [120/1] via 192.168.100.3, 00:00:07, Serial0 > > > > Current configuration: > > ! > > version 12.0 > > service timestamps debug uptime > > service timestamps log uptime > > no service password-encryption > > ! > > hostname termsrv > > ! > > ip subnet-zero > > no ip domain-lookup > > ! > > partition flash 2 8 8 > > ! > > ! > > ! > > process-max-time 200 > > ! > > interface Loopback0 > > ip address 10.10.0.1 255.255.255.0 > > no ip directed-broadcast > > ! > > interface Loopback1 > > ip address 3.3.3.3 255.255.255.0 > > no ip directed-broadcast > > ! > > interface Ethernet0 > > ip address 193.1.1.2 255.255.255.0 > > no ip directed-broadcast > > no keepalive > > ! > > interface Serial0 > > bandwidth 115200 > > ip address 192.168.100.1 255.255.255.0 > > no ip directed-broadcast > > encapsulation frame-relay > > no ip mroute-cache > > cdp enable > > frame-relay interface-dlci 100 > > frame-relay interface-dlci 110 > > frame-relay interface-dlci 115 > > frame-relay lmi-type ansi > > ! > > router rip > > network 3.0.0.0 > > network 192.168.100.0 > > network 193.1.1.0 > > ! > > ip classless > > no ip http server > > ! > > ! > > line con 0 > > logging synchronous > > transport input none > > line 1 16 > > no exec > > transport input all > > line aux 0 > > line vty 0 4 > > login > > ! > > end > > > > termsrv#debug ip rip > > RIP protocol debugging is on > > termsrv# > > 20:18:07: RIP: received v1 update from 192.168.100.3 on Serial0 > > 20:18:07: 16.0.0.0 in 1 hops > > 20:18:07: 192.168.100.0 in 1 hops > > 20:18:07: 195.0.0.0 in 1 hops > > 20:18:07: RIP: received v1 update from 192.168.100.3 on Serial0 > > 20:18:07: 16.0.0.0 in 1 hops > > 20:18:07: 192.168.100.0 in 1 hops > > 20:18:07: 195.0.0.0 in 1 hops > > 20:18:07: RIP: received v1 update from 192.168.100.3 on Serial0 > > 20:18:07: 16.0.0.0 in 1 hops > > 20:18:07: 192.168.100.0 in 1 hops > > 20:18:07: 195.0.0.0 in 1 hops > > 20:18:07: RIP: received v1 update from 192.168.100.3 on Serial0 > > 20:18:07: 16.0.0.0 in 1 hops > > 20:18:07: 192.168.100.0 in 1 hops > > 20:18:07: 195.0.0.0 in 1 hops > > termsrv# > > 20:18:17: RIP: source 193.1.1.2, mask 255.255.255.0 > > 20:18:17: -Traceback= 3EDB84 3EDF4C 3EE014 2BBF80 3F1A50 3F1F08 > > 20:18:17: RIP: source 3.3.3.3, mask 255.255.255.0 > > 20:18:17: -Traceback= 3EDB84 3EDF4C 3EE014 2BBF80 3F1A50 3F1F08 > > 20:18:17: RIP: source 192.168.100.1, mask 255.255.255.0 > > 20:18:17: -Traceback= 3EDB84 3EDF4C 3EE014 2BBF80 3F1A50 3F1F08 > > termsrv# > > 20:18:18: RIP: received v1 update from 192.168.100.4 on Serial0 > > 20:18:18: 192.168.100.0 in 1 hops > > 20:18:18: 64.0.0.0 in 1 hops > > 20:18:19: RIP: received v1 update from 192.168.100.4 on Serial0 > > 20:18:19: 192.168.100.0 in 1 hops > > 20:18:19: 64.0.0.0 in 1 hops > > 20:18:19: RIP: received v1 update from 192.168.100.4 on Serial0 > > 20:18:19: 192.168.100.0 in 1 hops > > 20:18:19: 64.0.0.0 in 1 hops > > 20:18:19: RIP: received v1 update from 192.168.100.4 on Serial0 > > 20:18:19: 192.168.100.0 in 1 hops > > 20:18:19: 64.0.0.0 in 1 hops > > 20:18:19: RIP: received v1 update from 192.168.100.2 on Serial0 > > 20:18:19: 12.0.0.0 in 1 hops > > 20:18:19: 192.168.100.0 in 1 hops > > 20:18:19: 194.0.0.0 in 1 hops > > 20:18:19: RIP: received v1 update from 192.168.100.2 on Serial0 > > 20:18:19: 12.0.0.0 in 1 hops > > 20:18:19: 192.168.100.0 in 1 hops > > 20:18:19: 194.0.0.0 in 1 hops > > 20:18:19: RIP: received v1 update from 192.168.100.2 on Serial0 > > 20:18:19: 12.0.0.0 in 1 hops > > 20:18:19: 192.168.100.0 in 1 hops > > 20:18:19: 194.0.0.0 in 1 hops > > 20:18:19: RIP: received v1 update from 192.168.100.2 on Serial0 > > 20:18:19: 12.0.0.0 in 1 hops > > 20:18:19: 192.168.100.0 in 1 hops > > 20:18:19: 194.0.0.0 in 1 hops > > > > termsrv#sh ver > > Cisco Internetwork Operating System Software > > IOS (tm) 2500 Software (C2500-I-L), Version 12.0(5)T, RELEASE SOFTWARE > > (fc1) > > Copyright (c) 1986-1999 by cisco Systems, Inc. > > Compiled Fri 23-Jul-99 03:14 by kpma > > Image text-base: 0x0000144C, data-base: 0x006628B4 > > > > Any ideas? I've searched CCO and couldn't find a bug. I'm running > > 12.0(5)T. > > > > Thanks, > > Shahram > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25994&t=25864 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
