We have a 6500 with dual SUP-1A's with each having MSFC. The MSFC's are configured in redundant mode. Thus the configuration can be changed on only one of the MSFC's.
There is a unique problem being faced with such a config. The vty 0 4 configuration is as follows: line vty 0 4 session-timeout 5 exec-timeout 4 0 password 7 094F471A1A0A login length 30 This configuration holds true for all the 5 vty's on MSFC15 (the designated MSFC). However on MSFC 16 the timeout value is active only on the vty 1 thru 4. On the vty 0 , even the "length 30" config is not active. I verify that the config for vty 0 is not the same as the other vty's by using the "sh line vty 0" command. Any help will be grately appreciated. Thanks and Regards ... Rick Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26102&t=26102 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
