Ummm.. the 1600s also will let you set the physical-layer. I work with over 200 1600s with modems hanging on the serial port with SMDS on the 56K WIC. This is the standard config plus using IP unnumbered, async default routing and ppp authentication.
Version is 11.3 IOS. ::Snip:: ! interface Serial0 physical-layer async ip address 10.10.10.2 255.255.255.0 encapsulation ppp no logging event subif-link-status :::snip:: MikeS Stefan Dozier wrote: > > AFAIK, the physical-layer async command is only available on the > 2500 series routers that have "low speed" > synchronous/asynchronous > capable serial interfaces, i.e. 2520 - 2523. The 2501 only has > "high speed" synchronous serial capable interfaces, and as such > wouldn't > need the physical-layer async command. > > So to answer your question...11.3 probably does support > physical-layer > async, if used with the appropriate hardware, i.e. 2520 - 2523. > > HTH > > Stefan# > > > >Is this command available in 2501 router? > > >I have IOS ver 11.3 and seems to me this IOS > > >doesn't support that. I wonder if any of the > > >latest IOS supports this command. > > TIA > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26610&t=26594 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
