>Hi All, >As I know that when you connect two routers with back-to-back cable and one >of >the routers has to set the clockrate to be the DCE end.
>Basically, the clockrate is limit the "speed" of the serial link. And the >bandwidth is only for the routing. >But someone told me that the bandwidth can also limit the speed of the serial >link. Is it true? And under what situation? >Thanks. >Francis That "someone" was misinformed! This is straight from CCO, and I'll post the actual link, so you can see for yourself. The bandwidth command sets an informational parameter only; you cannot adjust the actual bandwidth of an interface with this command. Here's the link....watch the word wrap! http://www.ieng.com/univercd/cc/td/doc/product/software/ios120/12cgcr/inter_ r/iraccess.htm#xtocid1599394 HTH Stefan# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26643&t=26640 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]