Or you could stick a CSS or two infront of the pixes. Regards,
Dave -----Original Message----- From: Engelhard M. Labiro [mailto:[EMAIL PROTECTED]] Sent: Monday, November 19, 2001 8:47 AM To: [EMAIL PROTECTED] Subject: Re: Is Pix failover can be Load balancer ? [7:26673] AFAIK PIX Failover only provides redundancy, no traffic load balance. If you need Firewall load-balance, go to the Nokia IP series firewall, or Checkpoint+Stonebeat combo (www.stonebeat.com) HTH > I wish to know wheather 2 cisco pix firewalls can be configured for > redundancy > as well as Load balancing. > > In general failover means in case of active PIX fails the stand by one will > come into line. > But my customer wants FWLB (Fire wall load balancing). > If any one has idea on this please help me. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26686&t=26673 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]