Ramesh No you don't need to config NAT, secondly to open up all ports for a host, as a source to any where, try this acl access-list acl_inside permit tcp host 192.10.1.1 any
For some more info have a look at the CCO http://www.cisco.com/warp/customer/707/ cheers Pat ""Ramesh c"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > 1) I got a pix in test(all internal) environment (configured as > outside,inside and DMZ).Do I need to use NAT to connect to the outside > segment from inside or vice versa.Since Pix can act as a router ,will > enabling routing solve this purpose without use of NAT.Applying access list > later for security. > > 2)I want to open all the ports of TCP connection for a particular host.How > do I go about? > > > cheers > Ramesh Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26833&t=26832 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]