Console> show test 1
Diagnostic mode (mode at next reset: complete)
Module 1 : 2-port 1000BaseX Supervisor
POST Results
Network Management Processor (NMP) Status: (. = Pass, F = Fail, U =
Unknown)
Galaxy Supervisor Status : F
CPU Components Status
Processor : .
DRAM : .
RTC : .
EEPROM : .
FLASH : .
NVRAM : .
Temperature Sensor : .
Uplink Port 1 : F
Uplink Port 2 : F
Me1 Status : .
EOBC Status : F
SCX1000 - 0
Register : .
Switch Sram : F
Switch Gigaports
0: . 1: F 2: . 3: .
4: F 5: F 6: F 7: F
8: F 9: F 10: F 11: .
SCX1000 - 1
Register : .
Switch Sram : F
Switch Gigaports
0: . 1: . 2: F 3: .
4: F 5: . 6: F 7: .
8: . 9: F 10: . 11: .
SCX1000 - 2
Register : .
Switch Sram : F
Switch Gigaports
0: F 1: F 2: . 3: F
4: F 5: F 6: F 7: F
8: F 9: F 10: F 11: F
> -----Original Message-----
> From: Tribavan Raina
> Sent: Wednesday, 21 November 2001 2:41 p.m.
> To: '[EMAIL PROTECTED]'
> Subject: Cat 4000 failing
>
> Hi all ..
>
> We recenlty bought a cat4000 switch and now after booting couple of times
> it shows all themodules as failed.Even the ports on supervisor are
> failing,
> No this is what I did ..
>
> set switchaccleration enable 1.
> I dont know whether this command did anything.
>
> The switch has 1 SUP .1 L3,2 6 PORT GIG cards..
>
> Any input will be appreciated.
>
> regds
>
> Tribavan Raina
> Network Consultant
>
> TechTonics Group Limited
> Level 31 Grand Plimmer Tower
> 2-6 Gilmer Terrace
> PO Box 11 199
> Wellington
>
> Ph: +64 4 385 2628
> Fax: +64 4 385 2400
>
> www.techtonics.co.nz
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=26953&t=26953
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
