Off the top of my noodle that looks good Happy Turkey Day!!
MADMAN "Bullock, Jason" wrote: > > I did check the archives on this one. > There has been much talk of fast ether channel for sure. > But I did not find a definitive answer, so please humor me for this question > on Fast Ether channel. > > I am configuring Fast Ether channel from a 7513 with 2 fast e ports to a cat > 6009 with 2 fast e ports. > I figure it should be an easy config, with a single vlan 1 on the cat 6009. > So here is a config that i think will work. > > 7513# > int port-channel 1 > ip address x.x.x.x 255.255.254.0 > ipx network XX > ip helper-address x.x.x.x (dhcp server) > > int fa 0/0 > channel-group 1 > > int fa0/1 > channel-group 1 > > cat 6009# > set port channel x/x-x auto (connected ports to router with cat5 straight > through cables) > > that should do it? anythoughts would be very appreciated! > > thanks. > jason -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27073&t=27073 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]