I don't know about Cscio documents. But this worked for me.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tribavan Raina Sent: Wednesday, November 21, 2001 2:39 PM To: [EMAIL PROTECTED] Subject: RE: accessing remote router [7:27060] No..there is no way other than console to set up the enable password even http wont work as per cisco doc. -----Original Message----- From: Bill Carter [mailto:[EMAIL PROTECTED]] Sent: Thursday, 22 November 2001 10:44 a.m. To: [EMAIL PROTECTED] Subject: RE: accessing remote router [7:27060] If you have it enabled, you can http to the router and set the enable password. Otherwise call someone at the site.... -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Hansraj Patil Sent: Wednesday, November 21, 2001 2:18 PM To: [EMAIL PROTECTED] Subject: accessing remote router [7:27060] Hello Everyone: I have remote router which has telnet password set but there is no enable mode password. I can telnet successfully & enter user mode but if I try to enter enable mode it gives error. router_1>enable % No password set Is there any way to access this router remotely without setting enable password on router? Thanks -hansraj Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27082&t=27060 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
