Jason, http://web.mit.edu/net-security/Camp/2001/camp.pdf Page 11 of this pdf, written by the security guys at MIT shows int f0/0 clearly..
Cisco home page (do a search for int f0/0) also shows http://www-search.cisco.com/pcgi-bin/search/public.pl?q=int+f0%2F0&num=10&se archselector=0 ... interface only. The following example shows such a display: R7732-01-uBR7111_Router#sh int f0/0 FastEthernet 1/0 is up, There are 9 other hits for the search on CISCO's home page. I guess the f0/0 can be used when there is no "int fddi" present. The int fA0/0 would make it unique in that case. The IOS just needs a command which is unique to the hardware. Hope this clears up the confusion. Thanks -Anil (CCNA wannabee) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 22, 2001 7:20 AM To: [EMAIL PROTECTED] Subject: Re: Skybox CCNA lab simulator int f0/0 [7:27080] It's actually int fA0/0 ... That's the problem with using Simulators... :-) . Sort of scary to see so many whose entire experiences is based on simulator... ""Scott Nawalaniec"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > just use int f0/0 > > Scott > -----Original Message----- > From: Jason [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, November 21, 2001 3:02 PM > To: [EMAIL PROTECTED] > Subject: Re: Sybex CCNA lab simulator int f0/0 [7:27080] > > > Well, the real router don't like it either. > > ""anil"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Please can someone tell me the correct syntax.. > > The Sybex CCNA lab simulator does not like my syntax for > > #int fastethernet ???? > > I can get it to work with int f0/0 > > Is this a simulator bug or am I doing something wrong? > > Thanks > > -Anil > > > > > > Router#config t > > Enter configuration commands, one per line. End with CNTL/Z. > > Router(config)#hostname 2621A > > 2621A(config)#int fas > > 2621A(config)#int fastethernet f0/0 > > ^ > > > > % Invalid input detected at '^' marker. > > > > 2621A(config)#int fastethernet f0? > > % Unrecognized command > > 2621A(config)#int fastethernet f 0/0 > > ^ > > > > % Invalid input detected at '^' marker. > > > > 2621A(config)#int fastethernet f0/0 > > ^ > > > > % Invalid input detected at '^' marker. > > > > 2621A(config)#int f0/0 > > 2621A(config-if)# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27124&t=27080 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]