Duplex mismatch perhaps?
Check that the NICs/switch ports agree on whether they are talking half
duplex or full duplex. Try forcing the settings rather than letting them
auto-detect.
JMcL
----- Forwarded by Jenny Mcleod/NSO/CSDA on 27/11/2001 09:26 am -----
"Rajneesh
Yadav"
cc:
Sent by: Subject: packet loss in LAN
[7:27303]
nobody@groupstud
y.com
26/11/2001
07:12
pm
Please
respond
to
"Rajneesh
Yadav"
Hi,
I am receiving packet loss in my LAN network.I have four compaq server and
desktops are connected to switches.I tried to awitch off allthe machines
and
tried to ping two machines each other still i got packet loss after 10
minutes.All the NIC were in auto detect mode and switch was also in
autosense mode.Then i changed all in 100 mbps but still i receive packet
loss after 10 minutes.The only thing left is cabling of the network.So
please help me out to solve this problem.
Regards
Rajneesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27381&t=27303
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
