Anil

First thing, are you connecting you PBX to the routers via fxs/fxo ports?
are they already in place?
As for MGCP and H323, I don't know too much about MGCP and I think it's used
for controlling gateways and higher layers features than H323 ( anyone
please feel free to comment), so go for H323 as you just want to originate
and terminate H323 traffic between your routers and CMs.

Have a look at this url on the cco for config's
http://www.cisco.com/univercd/cc/td/doc/product/access/nubuvoip/voip5300/ind
ex.htm
it's mainly about AS5300s but the platform doesn't really matter once the
interfaces are configured. Let me know if you need more info,

cheers

Pat


""Anil Kumar""  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> This is the Voice network  i am implementing.
> Voip on this network is working.
>
> Analog PhoneAnalog Phone
>                       |              |
>                       |              |
>                       |              |
>
> IPtelphone->CCM3.0->3660 Router-->3640 Router-->IPtelephone
>                    With NM-HDV    With NM-HDV
>                   (Main Office)  (Remote Office)
>
>
>
> The problem which i am facing is the call routing between
> the IP telephone & the Analog phones to both locations.
> I am bit confused, and not sure to use which type of
> Gateway Types ( MGCP, or H.323) for the 3660 Routers.
> I read that MGCP is being used for mainly FXS/ FXO ports.
>
> I am using an R2 Digital Signalling for the NM-HDV card.
> I have enclosed the config of the main location, the same
> carries for the remote location too.
>
> Request your sugesstion / Comments on this.
>
> Regards.. Anil
>
>
>
> Current configuration:
> !
> version 12.1
> service timestamps debug datetime msec
> service timestamps log uptime
> no service password-encryption
> service udp-small-servers max-servers no-limit
> !
>
> !
> enable secret 5 $1$QdNt$.YqZyaiFoHfFW.ZP1yHzG/
>
> !
> !
> !
> !
> !
> memory-size iomem 10
> voice-card 2
> !
> ip subnet-zero
> ip dhcp ping timeout 2000
> ip dhcp relay information option
> !
> ip dhcp-server 179.65.51.20
> lane client flush
> isdn switch-type primary-net5
> cns event-service server
> !
> !
> voice class permanent 10
> signal pattern idle transmit 0001
> signal pattern idle receive 0001
> !
> !
> !
> !
> !
> !
> controller E1 1/0
>  framing NO-CRC4
>  clock source internal
>  channel-group 1 timeslots 1-31
>  description connected to Branch
> !
> controller E1 2/0
>  framing NO-CRC4
>  clock source internal
>  ds0-group 0 timeslots 1-15,17-31 type r2-digital dtmf dnis
>  description CONNECTED TO NORTEL EPABX
> !
> !
> !
> interface Multilink1
>  ip address 192.168.0.2 255.255.255.252
>  ip helper-address 179.65.51.20
>  ip directed-broadcast
>  ip tcp header-compression iphc-format
>  no ip mroute-cache
>  fair-queue 2048 2048 1000
>  no cdp enable
>  ppp multilink
>  ppp multilink fragment-delay 20
>  ppp multilink interleave
>  multilink-group 1
>  ip rtp header-compression iphc-format
>  ip rtp priority 16384 16383 1488
> !
> interface FastEthernet0/0
>  ip address 179.65.51.1 255.255.0.0
>  ip helper-address 179.65.51.20
>  ip directed-broadcast
>  no ip mroute-cache
>  speed auto
>  half-duplex
>  no cdp enable
> !
> interface Serial1/0:1
>  no ip address
>  ip helper-address 179.65.51.20
>  ip directed-broadcast
>  encapsulation ppp
>  ip mroute-cache
>  no fair-queue
>  ppp multilink
>  multilink-group 1
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 192.168.0.1
> no ip http server
> !
> dialer-list 1 protocol ip permit
> dialer-list 1 protocol ipx permit
> no cdp advertise-v2
> !
> snmp-server engineID local 00000009020000024B24BF30
> snmp-server community public RO
> snmp-server packetsize 2048
> !
> voice-port 2/0:0
>  no modem passthrough
>  cptone GB
> !
> dial-peer voice 100 voip
>  destination-pattern 125T
>  session target ipv4:192.168.0.1
>  codec g711alaw
>  ip precedence 5
> !
> dial-peer voice 10 pots
>  destination-pattern 116T
>  port 2/0:0
>  forward-digits all
> !
> !
> line con 0
>  transport input none
> line aux 0
> line vty 0 4
>  exec-timeout 20 0
>  login
> !
> end
>
> HO#
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month.
> http://geocities.yahoo.com/ps/info1




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27781&t=27533
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to