You don't put an Ip address on the e0 interface just on e0.1 etc. This is beacuse the main interface will overwrite the sub interface config. Therefore the router is having problems. If you want to use secondary addresses on the main interface then you can configure an Ip address on e0 and then you type in the next IP address you want that interface to have and type eg 10.0.0.1 255.255.255.0 secondary. This would give the one interface 2 addresses
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28067&t=28012 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
