Verify Framing, Line Code, and Clock Source parameters with Telco, as it looks like you have a mis-match on those settings. Loss of Frames indicates that your Framing or Line code parameters don't match what the telco has set on their end, but it also might just be the Clock Source parameter being incorrectly set.
Let us know if that fixes your problem. Mark Odette II StellarConnection Services CCNA, 3/4 CCNP, etc., etc. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Vijendra Jaiswal Sent: Wednesday, December 05, 2001 6:55 AM To: [EMAIL PROTECTED] Subject: Channelized E1 terminatin from MUX [7:28178] Hello , We are using channelized E1 on a PRI card of cisco3600 , for multiple 64K ckts coming from a MUX which is placed at the TELCO . 1) Is it possible to get a loop on the channelized PRI controller( show controller e1) by giving a 4 wire physical loop ? I did not get the loop on the E1 controller of cisco router , by giving a four wire loop or by taking a loop from TELCO . Loop is ok if tested on BERT meter . 2) All connectivity/media is ok but the TELCO person observes an alarm on the MUX when the channelized E1 is terminated at the Cisco PRI card on a 3600 router. 3) The o/p of the controller is given below : show controllers e1 1/0 E1 1/0 is down. Applique type is Channelized E1 - balanced Transmitter is sending remote alarm. Receiver has loss of signal. alarm-trigger is not set Framing is NO-CRC4, Line Code is HDB3, Clock Source is Internal. Data in current interval (29 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 29 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 29 Unavail Secs Data in Interval 1: 1 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 827 Fr Loss Secs, 1 Line Err Secs, 0 Degraded Mins ................................................... If anyone knows how to resolve this pls help me out. Thanks & Regards, Vijendra. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28190&t=28178 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
