It's not on CCIE lab, it's on SWIE lab. It looks that you have
to configure either:
1.
line vty 0 4
terminal-type ansi
or
2.
line vty 0 4
terminal-type xterm
I'm using xterm, working fine, but some people couldn't see it
with vt100.
Sasa
Bill Carter wrote:
>
> I don't want anyone to break the NDA, but is this on the CCIE lab?? The
> trick is, you would have to use
>
> service compress-config
>
> ip route 1.1.1.0 255.255.255.0 R2D2
> ip route 2.2.2.0 255.255.255.0 C3PO
>
> Router bgp 4
> neighbor 1.1.1.1 remote-as 5
> neighbor 1.1.1.1 ebgp-multihop GalaxyFarFarAway
>
> Router ospf 1
> redistribute static subnets subgalaxies
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Sasa Milic
> Sent: Wednesday, December 05, 2001 11:51 AM
> To: [EMAIL PROTECTED]
> Subject: Completely OT: StarWars [7:28204]
>
> StarWars episode IV in text mode:
>
> telnet to towel.blinkenlights.nl
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28224&t=28204
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
