in the aaa accounting command , just use stop-only so that the AS5300 will triggered the Radius accounting server when the call is stop.
""Patrick Donlon"" What billing system are you using? Is it based on the PSTN Switches or do > you use Radius accounting? > > cheers Pat > > > ""Chong Chun Wei (Central)"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi all, > > Pls help. > > > > Scenario: > > > > 2 AS 5300 acting as the originating and terminating gateway on each > > side of the network. The originating AS5300 is connected to the PSTN > switch > > ( SW A ) using PRI signaling while the terminating AS 5300 is connected to > > the PSTN switch ( SW B) using R2 signaling. The customer will dial a > > specific number to access the SW A and then enter the account and pin > > number. After the authentication, there will a beep tone follow by the > > message which prompt the user to enter the destination phone number. > > > > > > For a normal scenario, > > > > After the entering of the destination phone number, there will be ringing > > tone. When B-party picked up the phone, there will be a second beep tone > > which will trigger the billing system to start the billing. > > > > However, what actually happens is that, > > > > After the entering of the destination phone number, just right before the > > ringing tone, there is a "click" sound immediately before the ringing tone > > which undesirably, trigger the billing system. This creates problem > because > > even before the call get connected, the customer has already been charged. > > > > The Attempted Solutions include > > 1. Program the progress indicator at the terminating gateway's dial-peer > > 2. check the output of the "debug isdn a931" (looks fine) > > > > However, the problem still haven't been solved. Please help. > > > > rgds > > Alvin Chong > > CCNA Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28284&t=28284 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]