I have 4 routers with a frame switch inbetween them and configured r1 is the hub router with 2 dlci with one sub int to r2 and r3 and then 1 dlci with another sub int going to r4. r3 is the only router with physical interface and r1,r2,r3 all have sub interfaces and the dlci statements. R3 requires map statments to reach r2 and r4 . My questions is about the network type used in OSPF . If I change all frame ospf int network type to point to mulit point all my routes show up and OSPF works fine, but if I use all non broadcast OSPF net type then OSPF routes and are not there and OSPF does not work right. This lab calls for me to use the non broadcast OSPF network type. Does anyone know how I can make this config work using the non broadcast OSPF network type instead of point to multipoint? Thanks in advance. Randy
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28550&t=28550 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]