Hi Navin, Are you using VLSMed IP's on the router if so try using ip classless, it solved my problem. if it doesn't send me your conf. b/c i faced similar problem while connecting to ISDN from Cisco 2501.
Bye Shakeel Shamsi M.Sc., MCSE,CCNA,CCNP. NKP wrote: > > Hi , > I am facing a problem on my Cisco router which is connected > to the ISDN > , I have got a static IP address and I am not able to telnet in > to the > router as my NAT is enabled for the ethernet , but once I > remove the NAT > from both the bri and ethernet interface , I am able to telnet > into it from > outside , what can i do so that Iam able to Telnet as well as > enable NAT > into the router. > > thanks in advance > > -- > Navin Parwal > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28556&t=28522 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]