Does anyone know why I am seeing active pvc's on this hub and spoke frame
relay config and only getting half succesfull pings. I had to delete the
dlci and interfaces and then reload the router because I changed the
interface type from point to multi. Or really just create a new sub
interface. See below what I am getting:
Thanks
This is a spoke router:
r4#sh frame map
Serial0 (up): ip 0.0.0.0 dlci 401(0x191,0x6410)
broadcast,
CISCO, status defined, active
Serial0.1 (up): point-to-point dlci, dlci 401(0x191,0x6410), broadcast
status defined, active
r4#ping 172.16.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.1.1, timeout is 2 seconds:
!.!.!
Success rate is 60 percent (3/5), round-trip min/avg/max = 68/68/68 ms
r4#
This is a hub:
r1#sh frame map
Serial0.3 (up): ip 172.16.1.3 dlci 103(0x67,0x1870), dynamic,
broadcast,, status defined, active
Serial0.3 (up): ip 172.16.1.2 dlci 102(0x66,0x1860), dynamic,
broadcast,, status defined, active
Serial0.2 (up): point-to-point dlci, dlci 104(0x68,0x1880), broadcast
status defined, active
r1#ping 172.16.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.1.2, timeout is 2 seconds:
!.!.!
Success rate is 60 percent (3/5), round-trip min/avg/max = 68/68/68 ms
r1#
And then from r3 which is a spoke router using a physical interface with map
statments I cannot connect to the other spoke routers at all.
r3#sh frame map
Serial0 (up): ip 172.16.1.5 dlci 301(0x12D,0x48D0), static,
CISCO, status defined, active
Serial0 (up): ip 172.16.1.1 dlci 301(0x12D,0x48D0), dynamic,
broadcast,, status defined, active
Serial0 (up): ip 172.16.1.2 dlci 301(0x12D,0x48D0), static,
CISCO, status defined, active
r3#ping 172.16.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.1.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
r3#
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28569&t=28569
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
