I believe you are referring to the exec-timeout command. To configure the length of time that an inactive terminal session window will remain open, use the exec-timeout global configuration command. To disable the exec timeout, use the no form of this command.
exec-timeout m s where m is the number of minutes and s is the number of seconds. !snip ! con 0 exect-timeout 10 0 ! !snip Cheers, Dan -----Original Message----- From: Ad L [mailto:[EMAIL PROTECTED]] Sent: Sunday, December 09, 2001 10:20 PM To: [EMAIL PROTECTED] Subject: what command to use... [7:28636] Hi all, I am new to Cisco. Please let me know the command to stay in Priviliged Exce Mode, the router keep kicking me out and I have to type enable password again to login if I let router idle for a while.. Thanks, Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28647&t=28636 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]