The blurb actually states it is not compatible with the 2600. Check the NM table towards the bottom of the link.
-----Original Message----- From: MADMAN [mailto:[EMAIL PROTECTED]] Sent: Monday, December 10, 2001 1:57 PM To: [EMAIL PROTECTED] Subject: Re: C2620 with NM-1FE1R2W? [7:28716] Here is a marketing blurb that appears to say it is supported on the 2600 platform but me thinks it lies ;) http://www.cisco.com/warp/public/cc/pd/rt/2600/prodlit/2636m_ds.htm Dave Johan Hjalmarsson wrote: > > Does a NM-1FE1R2W= work in a Cisco 2620 router? > > I thought all NM's worked in both the C26xx and C36xx series, but I > can't get this configuration to work. When I look in the HW/SW > compability matrix only SW for the C36xx is shown for this module. > > Any suggestions? -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28745&t=28716 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
