Dear Sirs and Madams:
I can't get into my Cisco 7513 Router which has Boards in Slot 3 and 4.
I am trying to get rom monitor mode to reset the password, which I have
forgotten, but because everything is ??? , I can't.
Below is my console diagnostic message. can anyone help?
Thanks,
Respectfully,
Richard Chang
R1(boot)>
System Bootstrap, Version 11.1(8)CA1, EARLY DEPLOYMENT RELEASE SOFTWARE
(fc1)
Copyright (c) 1997 by cisco Systems, Inc.
SLOT 6 RSP is system master
RSP4 processor with 65536 Kbytes of main memory
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
Self decompressing the image :
#################################################
############################################################################
####
################################################################### [OK]
%DBUS-3-BADCTRLRTYPE: Invalid controller type 30 in slot 3
-Traceback= 60191B24 60191C98 601921B8 60192A8C 60195D74 600F4270 600F42E4
600E8
440 600E8648 600E9760 600E974C
%DBUS-3-BADEEPROM: Invalid EEPROM data found for card in slot 3, card
disabled
%DBUS-3-BADCTRLRTYPE: Invalid controller type 30 in slot 4
-Traceback= 60191B24 60191C98 601921B8 60192A8C 60195D74 600F4270 600F42E4
600E8
440 600E8648 600E9760 600E974C
%DBUS-3-BADEEPROM: Invalid EEPROM data found for card in slot 4, card
disabled
%SYS-4-CONFIG_NEWER: Configurations from version 11.3 may not be correctly
under
stood.
%SYS-3-CPUHOG: Task ran for 3004 msec (1200/668), Process = Init, PC = 0
-Traceback= 6012934C 6012AE4C 60127414 600109B0
Boot in place status errorboot of "cisco2-RSP4" using boot helper
"bootflash:rsp
-boot-mz.111-8.CA1" failed
error returned: File boot failed -- File not accessible
loadprog: error - on file open
boot: cannot load "cisco2-RSP4"
System Bootstrap, Version 11.1(8)CA1, EARLY DEPLOYMENT RELEASE SOFTWARE
(fc1)
Copyright (c) 1997 by cisco Systems, Inc.
SLOT 6 RSP is system master
RSP4 processor with 65536 Kbytes of main memory
PCMCIA slot0 device is not initialized
open: read error...requested 0x4 bytes, got 0x0
trouble reading device magic number
loadprog: error - on file open
boot: cannot load "slot0:rsp-dsv-mz.113-3a.bin"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=28759&t=28759
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
