Hi All I have a problem with a router running BGP. I have two 7204vxr's running BGP connecting to two different service providers, I upgraded the IOS of one the routers with version 12.1(5)T10 (IP PLUS IPSEC 3DES) and the boot image, it ran for a week with no problems. I upgraded the other router with the same images and as got memory allocation errors when it established adjacency with the BGP neighbours, see the output below. I'm no BGP expert and I believe there is enough memory in the router, so any suggestions will be appreciated
Regards Pat *Nov 25 15:55:29: %BGP-5-ADJCHANGE: neighbor *.*.*.* Up *Nov 25 15:55:31: %BGP-5-ADJCHANGE: neighbor *.*.*.* Up *Nov 25 15:55:41: %BGP-5-ADJCHANGE: neighbor *.*.*.* Up *Nov 25 15:56:07: %SYS-2-MALLOCFAIL: Memory allocation of 65496 bytes failed from 0x606BE0F4, pool Processor, alignment 0 -Process= "BGP Router", ipl= 0, pid= 118 -Traceback= 606C1450 606C38B0 606BE0FC 606BE8F0 6082D330 6082D578 6082EA84 609FA5EC 609FB2B8 61476248 609FB35C 609D61F0 606B7DA4 606B7D90 *Nov 25 15:56:08: %BGP-5-ADJCHANGE: neighbor *.*.*.* Down No memory *Nov 25 15:56:08: %BGP-5-ADJCHANGE: neighbor *.*.*.* Down No memory *Nov 25 15:56:08: %BGP-5-ADJCHANGE: neighbor *.*.*.*Down No memory *Nov 25 15:56:11: %BGP-3-NOTIFICATION: sent to neighbor *.*.*.* 3/1 (update malformed) 0 bytes *Nov 25 15:56:37: %BGP-5-ADJCHANGE: neighbor *.*.*.* Up *Nov 25 15:56:37: %BGP-5-ADJCHANGE: neighbor *.*.*.* Up *Nov 25 15:56:51: %BGP-5-ADJCHANGE: neighbor *.*.*.* Up Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28819&t=28819 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
