I have set up RSRB in the lab, and I have verified the configurations several times with various sources. The issue that I am seeing is that when I specify the remote neighbor in the configuration, the state transitions from dead to closed, but never to open. My question is, what causes the connection to go from closed to open, do I have to have traffic such as SNA or netbios to force the neighbors to come up? Is there a way to simulate this traffic if I only have 3 token ring routers? Any help is appreciated.
R4#sh run Building configuration... Current configuration: ! version 12.0 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname R4 ! ! ip subnet-zero ! ! ! source-bridge ring-group 12 source-bridge remote-peer 12 tcp 130.13.5.4 source-bridge remote-peer 12 tcp 130.13.1.1 ! ! interface Serial0 ip address 4.4.4.4 255.255.255.0 no ip directed-broadcast ip ospf interface-retry 0 no ip mroute-cache no fair-queue ! interface Serial1 no ip address no ip directed-broadcast shutdown ! interface TokenRing0 ip address 130.13.5.4 255.255.255.0 no ip directed-broadcast ip ospf interface-retry 0 ring-speed 16 multiring ip source-bridge 2 1 12 source-bridge spanning ! interface BRI0 no ip address no ip directed-broadcast shutdown ! router ospf 100 network 4.4.4.0 0.0.0.255 area 0 network 130.13.5.0 0.0.0.255 area 0 ! ip classless ! ! ! line con 0 transport input none line aux 0 line vty 0 4 login ! end R4# R4#ping Protocol [ip]: Target IP address: 130.13.1.1 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: 130.13.5.4 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 130.13.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/8 ms R4# R4#sh source Local Interfaces: receive transmit srn bn trn r p s n max hops cnt cnt drops To0 2 2 12 * b 7 7 7 0 0 0 Global RSRB Parameters: TCP Queue Length maximum: 100 Ring Group 12: This TCP peer: 130.13.5.4 Maximum output TCP queue length, per peer: 100 Peers: state bg lv pkts_rx pkts_tx expl_gn drops TCP TCP 130.13.5.4 - 3 0 0 0 0 0 TCP 130.13.1.1 closed 3 0 0 0 0 0 Rings: bn: 2 rn: 2 local ma: 4008.de5c.a38a TokenRing0 fwd: 0 Explorers: ------- input ------- ------- output ------- spanning all-rings total spanning all-rings total To0 0 0 0 0 0 0 Explorer fastswitching enabled Local switched: 0 flushed 0 max Bps 38400 rings inputs bursts throttles output drops To0 0 0 0 0 R4# R3#sh run Building configuration... Current configuration: ! version 12.0 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname R3 ! ! ip subnet-zero ! ! ! source-bridge ring-group 12 source-bridge remote-peer 12 tcp 130.13.1.1 source-bridge remote-peer 12 tcp 130.13.5.4 ! ! interface Serial0 ip address 4.4.4.5 255.255.255.0 no ip directed-broadcast ip ospf interface-retry 0 no ip mroute-cache no fair-queue clockrate 1300000 ! interface Serial1 no ip address no ip directed-broadcast shutdown ! interface TokenRing0 ip address 130.13.1.1 255.255.255.0 no ip directed-broadcast ip ospf interface-retry 0 ring-speed 16 multiring ip source-bridge 1 1 12 source-bridge spanning ! interface BRI0 no ip address no ip directed-broadcast shutdown ! router ospf 100 network 4.4.4.0 0.0.0.255 area 0 network 130.13.1.0 0.0.0.255 area 0 ! ip classless ! ! ! line con 0 transport input none line aux 0 line vty 0 4 login ! end R3# R3#ping Protocol [ip]: Target IP address: 130.13.5.4 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: 130.13.1.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 130.13.5.4, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/9/28 ms R3# R3#sh sour Local Interfaces: receive transmit srn bn trn r p s n max hops cnt cnt drops To0 1 1 12 * f 7 7 7 0 0 0 Global RSRB Parameters: TCP Queue Length maximum: 100 Ring Group 12: This TCP peer: 130.13.1.1 Maximum output TCP queue length, per peer: 100 Peers: state bg lv pkts_rx pkts_tx expl_gn drops TCP TCP 130.13.1.1 - 3 0 0 0 0 0 TCP 130.13.5.4 closed 3 0 0 0 0 0 Rings: bn: 1 rn: 1 local ma: 4008.de6c.6382 TokenRing0 fwd: 0 Explorers: ------- input ------- ------- output ------- spanning all-rings total spanning all-rings total To0 0 0 0 0 0 0 Explorer fastswitching enabled Local switched: 0 flushed 0 max Bps 38400 rings inputs bursts throttles output drops To0 0 0 0 0 R3# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28835&t=28835 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
