I dont know link is not showing in the last mail. http://www.cisco.com/univercd/cc/td/doc/pcat/mxne__p1.htm
Regds, Balvindar Sabarwal Sr. Consultant - Solution Engineering Group InnerFrame Microland Group No. 201 / A wing, Phoenix House, Senapati Bapat Marg, Lower Parel, Mumbai 400013. Tel : +91 22 4604132 / 33 /34 Fax : +91 22 4604135 Email : [EMAIL PROTECTED] -----Original Message----- From: Balvindar Sabarwal Sent: Saturday, December 15, 2001 11:00 AM To: 'DB'; [EMAIL PROTECTED] Subject: RE: NM-1E1R2W on a cisco 2600 router [7:29262] http://www.cisco.com/univercd/cc/td/doc/pcat/mxne__p1.htm This link shows, it doesn't support 2600 series routers. Regds, Balvindar Sabarwal Sr. Consultant - Solution Engineering Group InnerFrame Microland Group No. 201 / A wing, Phoenix House, Senapati Bapat Marg, Lower Parel, Mumbai 400013. Tel : +91 22 4604132 / 33 /34 Fax : +91 22 4604135 Email : [EMAIL PROTECTED] -----Original Message----- From: DB [mailto:[EMAIL PROTECTED]] Sent: Saturday, December 15, 2001 4:29 AM To: [EMAIL PROTECTED] Subject: NM-1E1R2W on a cisco 2600 router [7:29262] Has any one out there used this module (nm-1e1r2w) on the 2600 router ? I cannot seem to find on cco whether this module is supported on this platform and what the minimum IOS would be. Any help would be appreciated.......thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29277&t=29262 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]