Is it possible that when you ping, that the device is using the wrong source address? This would cause the packet to reach the destination, but the destination doesnot know how to reply. Make sure that if your server has more than one interface that the non relative interfaces are disconnected. I've run into problems with a windows server in which, it insisted on using the wrong source address, hence all pings failed. Let me know if this is the problem ""Circusnuts"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > 3524xl#sh arp > Protocol Address Age (min) Hardware Addr Type Interface > Internet 10.1.1.12 5 00e0.1456.4cd8 ARPA VLAN1 > Internet 10.1.1.2 1 00e0.2998.3372 ARPA VLAN1 > Internet 10.1.1.3 - 0003.6b80.8180 ARPA VLAN1 > 3524xl#ping 10.1.1.2 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 10.1.1.2, timeout is 2 seconds: > ..... > Success rate is 0 percent (0/5) > > Im going crazy here. 10.1.1.2 is a directly connected server and is > live to the Internet (accepting E-mail as we speak). 10.1.1.2 can Ping > everyone on this switch. 10.1.1.12 (Internet router) cannot Ping > 10.1.1.2 (server) and I cant even Ping 10.1.1.2 (sever) when @ the > Console of 10.1.1.3 (3524 LAN switch IP). In essence- the server works, > but I can see it. I have rebooted all devices and Arp entries stay > current and increment accordingly. > > Ideas ??? > Phil
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29297&t=29290 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
