You are looking for Policy-Based Routing. Check out the following link for details, and watch out for the nasty word wrap:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/qos_c/qcpart1/qcpolicy.htm HTH, John >>> "Anibal Pita" 12/18/01 9:35:09 AM >>> Hi guys I have a 2520 Cisco Router with two serial WAN (0,1) ports connected via leased line each one. For the Ethernet port is passing traffic from Net A and Net B to WAN Network. Is possible tell the Router send traffic coming from Net A to WAN Port 0 and send traffic coming from Net B to WAN Port 1. ?? If yes, how I can to do it ?? Best regards I wait !! Anibal P. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29493&t=29482 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]