you have defined an absolute timeout for 3 min... Dave
Simon Watson wrote: > > Hi Guys I am setting up a Cisco 3660 with remote dialling access for ISDN > & PSTN users(30 Digital Modem Module & Pri Module installed), everything > seems ok, however when a ISDN User dials in to the 3660 after approx 160- > 180 seconds the user gets kicked out of the 3660(The user is typing at > the time so there was activity). I have whipped up the idle timeout to 3 > hours but the same thing happens.Below is a copy of part of the config, > Is there anything I am ommitting please let me know. Thanks Simon > encapsulation > ppp > timeout absolute 3 0 dialer rotary-group 0 > isdn switch-type primary-net5 > isdn incoming-voice modem > peer default ip address pool dialin_pool > ppp authentication ms-chap > ! > interface Group-Async1 > ip unnumbered Loopback0 > encapsulation ppp > dialer in-band > dialer-group 1 > async dynamic routing > async mode interactive > peer default ip address pool dialin_pool > ppp authentication ms-chap dial_in > group-range 33 62 > ! > interface Dialer0 > ip unnumbered Loopback0 > encapsulation ppp > dialer in-band > dialer idle-timeout 10800 > dialer-group 1 > peer default ip address pool dialin_pool > ppp authentication ms-chap dial_in > ! > interface Dialer1 > ip unnumbered Loopback1 > > ------------------------------------------------------------------------ > > Join the worlds largest e-mail service with MSN Hotmail. Click Here -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29530&t=29521 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]