I havent worked with this mod before, heres a bit of useful info.. Brian "Sonic" Whalen Success = Preparation + Opportunity
---------- Forwarded message ---------- Date: Wed, 2 Jan 2002 09:00:23 +0200 From: Andrew Larkins To: Brian Whalen Subject: RE: %AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive collisions, [7:306 43] The 1E2W module is a 10MB module - change the switch port speeds and duplex -----Original Message----- From: Brian Whalen [mailto:[EMAIL PROTECTED]] Sent: 02 January 2002 07:00 AM To: [EMAIL PROTECTED] Subject: Re: %AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive collisions, [7:30643] Looks like http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/itg_medi.pdf has some tips to try. Brian "Sonic" Whalen Success = Preparation + Opportunity On Tue, 1 Jan 2002, SA J wrote: > Hi All, > Im facing one problem on our central site i.e > currently im using > Cisco > 3640 router with fast ethernet module in it, its > working perfect, > but > when i change the module i.e 1E2W & no shuts the > ethernet > interface > it, then the following scenario occurs! > > Router(config-if)# > Router(config-if)#no shut > Router(config-if)# > %AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive > collisions, TDR=1, > TRC=0. > %LINEPROTO-5-UPDOWN: Line protocol on Interface > Ethernet0/0, > changed > state to up > %LINK-3-UPDOWN: Interface Ethernet0/0, changed > state to up > Router(config-if)#ip address 10.1.0.1 255.255.0.0 > Router(config-if)# > %AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive > collisions, TDR=1, > TRC=0. > %AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive > collisions, TDR=1, > TRC=0. > %AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive > collisions, TDR=1, > TRC=0. > > > Ethernet doesnt work properly! Excessive > collisions occurs! but > the > same module is working alright on our brach > office. > Any Suggestions? Need solution urgently. > > Rgds, > SAJ > > > __________________________________________________ > Do You Yahoo!? > Send your FREE holiday greetings online! > http://greetings.yahoo.com > X-Apparently-To: [EMAIL PROTECTED] via web20908.mail.yahoo.com; 01 > Jan 2002 02:49:24 -0800 (PST) > X-Track: 1: 40 > Received: from 202.163.99.184 (EHLO company.mail) (202.163.99.184) by > mta442.mail.yahoo.com with SMTP; 01 Jan 2002 02:49:23 -0800 (PST) > Received: from gacpak.com [10.1.0.10] by company.mail [10.1.1.157] with > SMTP (MDaemon.PRO.v5.0.1.T) for ; Tue, 01 Jan > 2002 15:49:00 +0500 > Received: from ccMail by gacpak.com (ccMail Link to SMTP R8.30.00.7) id > A1009928999; Tue, 01 Jan 2002 15:50:08 +0500 > X-Mailer: ccMail Link to SMTP R8.30.00.7 > Date: Tue, 01 Jan 2002 15:51:46 +0500 > From: > To: , > Subject: %AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive collisions, TDR=1 > MIME-Version: 1.0 > Content-Type: text/plain; charset=US-ASCII > Content-Transfer-Encoding: 7bit > Content-Description: "cc:Mail Note Part" > X-MDRemoteIP: 10.1.0.10 > X-Return-Path: [EMAIL PROTECTED] > X-MDaemon-Deliver-To: [EMAIL PROTECTED] > Content-Length: 474 > > Hi All, > Im facing one problem on our central site i.e currently im using Cisco > 3640 router with fast ethernet module in it, its working perfect, but > when i change the module i.e 1E2W & no shuts the ethernet interface > it, then the following scenario occurs! > > Router(config-if)# > Router(config-if)#no shut > Router(config-if)# > %AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive collisions, TDR=1, TRC=0. > %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed > state to up > %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up > Router(config-if)#ip address 10.1.0.1 255.255.0.0 > Router(config-if)# > %AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive collisions, TDR=1, TRC=0. > %AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive collisions, TDR=1, TRC=0. > %AMDP2_FE-5-COLL: AMDP2/FE(0/0), Excessive collisions, TDR=1, TRC=0. > > > Ethernet doesnt work properly! Excessive collisions occurs! but the > same module is working alright on our brach office. > Any Suggestions? Need solution urgently. > > Rgds, > SAJ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30649&t=30649 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
