Thanks for all the replies. Berry, thanks for the link to the Config Register Calculator! You were correct regarding the console linespeed. It was set at 115200. I changed it before the holidays but forgot that I had done this when I got back to the office today! Changed it back to 9600 and all is well!
Shawn K. -----Original Message----- From: Berry Mobley [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 02, 2002 6:37 PM To: Kaminski Shawn G; [EMAIL PROTECTED] Subject: Re: Configuration Register Question [7:30713] Boson's Config Register Calculater (free at www.boson.com) says that your console linespeed is 115200 instead of 9600. Console port speed is set with the higher bits. Berry At 05:38 PM 1/2/2002 -0500, you wrote: >I was working on a 2611 router and noticed that the configuration >register was set to 0x3962 !!! I tried to change it to 0x2102 but says >it will change to 0x3922 at the next reload. Just curious if anyone has >seen this before and what it means. When I looked at CCO I noticed that >they didn't have any information on 0x3000, only 0x1000, 0x2000, >0x4000, and 0x8000. > >Shawn K. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30726&t=30713 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]