both are hardcoded to 10MB half duplex. I am getting input errors on the switch. Strangley enough the numbers of these errors are the same as the runt frames.
-----Original Message----- From: McCallum, Robert [mailto:[EMAIL PROTECTED]] Sent: 03 January 2002 13:00 PM To: 'Andrew Larkins' Subject: RE: Excess collisions on Ethernet interface [7:30769] sorry, check that your router (3640) is set to half duplex 10 meg. -----Original Message----- From: Andrew Larkins [mailto:[EMAIL PROTECTED]] Sent: 03 January 2002 11:08 To: McCallum, Robert; Cisco Mail List Subject: RE: Excess collisions on Ethernet interface [7:30769] Output from the Ethernet interface on the switch FastEthernet0/1 is up, line protocol is up Hardware is Fast Ethernet, address is 0003.e335.6f01 (bia 0003.e335.6f01) Description: Ethernet Connection to Cisco 3640 router MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 254/255, txload 2/255, rxload 5/255 Encapsulation ARPA, loopback not set Keepalive not set Half-duplex, 10Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:52, output 00:00:00, output hang never Last clearing of "show interface" counters 00:04:23 Queueing strategy: fifo Output queue 0/40, 0 drops; input queue 0/75, 0 drops 5 minute input rate 219000 bits/sec, 41 packets/sec 5 minute output rate 92000 bits/sec, 73 packets/sec 12575 packets input, 8630619 bytes Received 399 broadcasts, 93 runts, 0 giants, 0 throttles 93 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 63 multicast 0 input packets with dribble condition detected 22161 packets output, 3425558 bytes, 0 underruns 0 output errors, 88 collisions, 0 interface resets 0 babbles, 0 late collision, 356 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped ou -----Original Message----- From: McCallum, Robert [mailto:[EMAIL PROTECTED]] Sent: 03 January 2002 12:36 PM To: 'Andrew Larkins' Subject: RE: Excess collisions on Ethernet interface [7:30769] Andrew, Check that your 3548 is configured as 10meg half duplex as well (NOT AUTOSENSE) -----Original Message----- From: Andrew Larkins [mailto:[EMAIL PROTECTED]] Sent: 03 January 2002 10:10 To: [EMAIL PROTECTED] Subject: Excess collisions on Ethernet interface [7:30769] Hi all, I have a 10MB Ethernet interface (1E2W) that is showing the following message: Jan 3 11:47:32: %AMDP2_FE-6-EXCESSCOLL: Ethernet0/0 TDR=3, TRC=0 I am assuming that this is the cause of the deferred packets. This port is configured as half duplex and connects to a Cisco 3548 switch. What also bothers me is the number of broadcasts here.. - is this not too high?? The point here is that users are complaining about slow response times - >From my pings etc, things seem to be fine. Any idea's? xxxxxxx>sho int e0/0 Ethernet0/0 is up, line protocol is up Hardware is AmdP2, address is 00e0.1e94.d8c1 (bia 00e0.1e94.d8c1) Description: Local LAN Internet address is 10.x.x.x/21 MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 4/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters 00:28:57 Input queue: 4/75/31/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 165000 bits/sec, 48 packets/sec 5 minute output rate 77000 bits/sec, 30 packets/sec 117274 packets input, 53901769 bytes, 0 no buffer Received 21256 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 input packets with dribble condition detected 51866 packets output, 20407116 bytes, 0 underruns 25 output errors, 1858 collisions, 0 interface resets 0 babbles, 0 late collision, 695 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30772&t=30769 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]