Hi, Check lists........... 1. Did you Logon to the Domain? 2. Make sure that Client for MS Network and File and Print sharing related services are on. 3. Try allow Ports 137, 138 and 139
Good Luck Regards. Oletu ----- Original Message ----- From: Navin Parwal To: Sent: Friday, January 04, 2002 3:26 AM Subject: VPN Error with Win2K server [7:30909] > Hi All , > I am facing a strange error , please guide me what I should do . > I am able to create a tunnel via dial up with VPN adapter from my > remote client which has Windows Millinieum to my Cisco Router which is in > my HQ , I have done the VPDN set up , but I am not able to authenticate with > my Win2K server , it gives an error message saying that no domain server is > available to authenticate . > As soon as I click on OK , i get logged on to the VPN , but only till the > router , I am not a part of the domain , i can ping to the WIn2K domain > controller and othe machines , but I can not access them . > I have enabled the users access for remote access and VPN on the Win2K > server, what could be > wrong , please guide me . > My show VPDN result is given below . > > If possible send me a mail at [EMAIL PROTECTED] as well > > thanks in advance > > Navin Parwal > > > > r4# > r4#sh vpdn > > %No active L2TP tunnels > > %No active L2F tunnels > > PPTP Tunnel and Session Information Total tunnels 1 sessions 1 > > LocID Remote Name State Remote Address Port Sessions > 2 estabd 210.214.164.144 1130 1 > > LocID RemID TunID Intf Username State Last Chg > 2 32768 2 Vi1 technosys\adm estabd 00:01:33 > > %No active PPPoE tunnels > r4# _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30931&t=30909 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]