Probably not too important that S1 is down as it's not configured. What I was getting at was that all of the interfaces are down on both routers. Could be wrong but would like to see a show int.
Gaz ""D. J. Jones"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Sorry I mispoke. Inteface s1 is shutdown. > ""Gaz"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Are any of the interfaces up? > > > > If they're down, the routes won't appear (by default) > > > > Gaz > > > > > > ""Stephane Wantou Siantou"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Hi guys, > > > I configured two cisco routers. One is an AS 2509 (RouterA) and the > other > > > is a 2503 (RouterB). When I do a "sh ip route" I do not see the ip > > > addresses of the interfaces directly connected to the routers. Can > > > anybody help me with that? Here is the result of the "sh ip route" > > command > > > on RouterA and RouterB, followed by the configurations of both routers. > > > > > > RouterA#sh ip route > > > Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP > > > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area > > > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 > > > E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP > > > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate > > > default > > > U - per-user static route, o - ODR > > > > > > Gateway of last resort is not set > > > > > > RouterB#sh ip route > > > Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP > > > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area > > > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 > > > E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP > > > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS > inter > > > area > > > * - candidate default, U - per-user static route, o - ODR > > > P - periodic downloaded static route > > > > > > Gateway of last resort is not set > > > > > > RouterA#sh star > > > Using 971 out of 32762 bytes > > > version 12.0 > > > service config > > > service timestamps debug uptime > > > service timestamps log uptime > > > no service password-encryption > > > hostname RouterA > > > enable secret 5 $1$nCDS$RTo6p39TeTeAXSL/nrbn00 > > > enable password password > > > ip subnet-zero > > > interface Ethernet0 > > > description LAN link to Sales 172.16.10.0 255.255.255.0 > > > ip address 172.16.10.1 255.255.255.0 > > > no ip directed-broadcast > > > interface Serial0 > > > description WAN Link to SF > > > ip address 172.16.20.1 255.255.255.0 > > > no ip directed-broadcast > > > no ip mroute-cache > > > no fair-queue > > > interface Serial1 > > > ip address 172.15.60.1 255.255.255.0 > > > no ip directed-broadcast > > > no cdp enable > > > ip classless > > > ip route 172.16.30.0 255.255.255.0 172.16.20.2 > > > ip route 172.16.40.0 255.255.255.0 172.16.20.2 > > > ip route 172.16.50.0 255.255.255.0 172.16.20.2 > > > dialer-list 1 protocol ip permit > > > dialer-list 1 protocol ipx permit > > > line con 0 > > > exec-timeout 0 0 > > > transport input none > > > line 1 8 > > > line aux 0 > > > line vty 0 4 > > > password password2 > > > login > > > end > > > > > > RouterB#sh star > > > Using 986 out of 32762 bytes > > > version 12.1 > > > no service single-slot-reload-enable > > > service timestamps debug uptime > > > service timestamps log uptime > > > no service password-encryption > > > hostname RouterB > > > logging rate-limit console 10 except errors > > > enable secret 5 $1$6GQN$5msR8qh8ViZb5cyAb4cXd/ > > > enable password password > > > ip subnet-zero > > > no ip finger > > > cns event-service server > > > interface Ethernet0 > > > ip address 172.16.30.1 255.255.255.0 > > > no cdp enable > > > no mop enabled > > > interface Serial0 > > > ip address 172.16.20.2 255.255.255.0 > > > interface Serial1 > > > bandwidth 56 > > > no ip address > > > shutdown > > > clockrate 56000 > > > no cdp enable > > > interface BRI0 > > > no ip address > > > shutdown > > > no cdp enable > > > ip kerberos source-interface any > > > ip classless > > > ip route 172.16.10.0 255.255.255.0 172.16.20.1 > > > ip route 172.16.50.0 255.255.255.0 172.16.40.2 > > > no ip http server > > > dialer-list 1 protocol ip permit > > > dialer-list 1 protocol ipx permit > > > line con 0 > > > exec-timeout 0 0 > > > transport input none > > > line aux 0 > > > line vty 0 4 > > > password password2 > > > login > > > end > > > > > > Thanks, Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31095&t=31085 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
